Switch box Product List and Ranking from 21 Manufacturers, Suppliers and Companies

Coin battery holder

The battery cannot be easily removed, eliminating concerns about poor contact.

Once the battery is installed, it is securely attached and will not easily come off, eliminating concerns about poor contact. There are two types: through-hole pin type and surface mount type. The terminal part has a gold-plated finish with nickel plating on stainless steel, allowing for the flow of weak currents. When removing or attaching the battery, simply press the central tab lightly with a finger or pen tip to easily detach the battery. For more details, please download the catalog.

Company：廣杉計器
Price：Other

others
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Touch Panel Box (TBOX) 'H240/D65'

All-in-one Mitsubishi wide touch panel! SUS original composite cable is pre-wired!

The "H240/D65" is a touch panel box equipped with the Mitsubishi Electric GT25 wide model. The 10.1-inch version comes with a box that has a rear door thickness of 65mm, while the 7-inch version offers options for front-opening and rear-opening boxes. This item comes pre-wired with a Mitsubishi Electric touch panel and Omron switches, allowing for immediate use upon delivery, making it a ready-to-use solution. Additionally, we also offer a type that consists solely of the box without any equipment or wiring. 【Features】 ■ Responds to requests for the GT25 wide type ■ Pre-wired all-in-one solution ■ Uses original composite cables ■ Pre-wired with SUS original composite cables that consolidate power, communication, and I/O into one *For more details, please refer to the PDF document or feel free to contact us.

Company：SUS
Price：Other

others
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AMC front panel

Essential functional component for inserting and removing AMC cards! Supports hot swapping! We accommodate requests for small quantities and a variety of custom options.

It is an essential functional component for inserting and removing AMC cards, and it also supports hot swapping. Various sizes are available as standard: single/double, Compact 3HP / Mid 4HP / Full 6HP. We can customize materials, processing specifications, and printed displays starting from just one piece. 【Features】 ■ Built-in AMC insertion and removal handle, with shielding function and light pipe ■ Custom production available for materials, processing shapes, and printed displays starting from one piece *For more details, please download the catalog or contact us.

Company：ユーバー
Price：Other

panel
others
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

CompactPCI front panel

Essential functional components for inserting, removing, and securing CompactPCI plug-in units.

Front panel with EMC shield specifications defined by the PICMG 2.0 CompactPCI standard. We accommodate custom requests for small quantities and various types, including hole processing, surface treatment, silk printing, and engraving. We offer a variety of accessory parts, including ejector handles essential for board insertion and removal, as our own products. We propose specifications tailored to customer needs, such as EMC compliance and RoHS compliance. 【Features】 - Custom specifications for hole processing, surface treatment, display printing, and engraving can be accommodated from a single piece. - All parts, including handles, are original products from our company, allowing for short delivery times. - Design support is also possible based on board diagrams and component documentation. *For more details, please download the materials or feel free to contact us.

Company：ユーバー
Price：Other

panel
others
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Uber's Subrack Front Panel Supporting the Railway System

Responding to the needs of the railway market for small quantities and a wide variety, not only for domestic cases but also for overseas cases.

Various control devices for railway vehicles, as well as ground-based train control devices, have been adopted over many years. We respond meticulously to the diverse needs of railway operators and equipment manufacturers, providing numerous custom products tailored to the unique characteristics of the railway market, including measures against electrical noise and vibration. Above all, we have a proven track record in high-speed railway projects where reliability and safety are paramount. We are also developing product variations aimed at miniaturization, space-saving, and improved operability to meet the needs of the times. <Features> Manufacturing at our own factory in Japan enables long-term stable supply. *For more details, please refer to the PDF materials or feel free to contact us.

Company：ユーバー
Price：Other

panel
Other fixtures and fittings
others
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Benefits of Introducing the RF Matrix Switch Box (MM6000)

[Application Example] A system suitable for interoperability testing of wireless communication devices (IOT) and automation of RF signal connection switching.

As the Internet of Things (IoT), where various devices connect to the internet, rapidly expands, cellular devices that play a crucial role in communication infrastructure are required to have greater reliability than ever before. Generally, simulating the propagation path and conducting handover tests between eNB (base station) and UE (terminal) is essential to evaluate all combinations for each device (model) and communication path. However, since eNBs and UEs come in a wide variety of manufacturers and lineups, evaluating all combinations requires an enormous amount of time and effort. The RF Matrix Switch Box (MM6000 series) is primarily composed of high-speed digital attenuators and RF matrix switches, making it an ideal product for automating variation tests (interconnectivity tests) such as propagation path simulation, handover testing, and RF signal connection switching. 【Product Introduction】 ■ RF Matrix Switch Box MM6000 *For more details, please refer to the PDF document or feel free to contact us.

Company：マイクロニクス
Price：Other

others
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Metal mall accessory for one switch box.

Switch box for metal mall. For one unit.

Metal moldings are ideal for protecting wiring in public spaces where people gather, such as offices, schools, and hospitals. They allow for flexible wiring in any space. We have added a switch box for one unit as an accessory for the metal moldings. The material is steel plate, and it has no knockouts, making the outer surface seamless. The one-unit version comes with two mounting screws (M4) for fixtures, while the two-unit version includes four mounting screws (M4). For more details, please contact us or refer to the catalog.

Company：マサル工業
Price：Other

Wiring devices
Water and sewerage pipe fittings
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Switch box BA-9034

BA-9034 Basketball Switch Box

Switch box BA-9034 (unit) - Please specify for 1 pair or 1/2 pair - Please specify for embedded type or exposed type

Company：都村製作所
Price：Other

Facility Design
Sports related facilities
Other commercial buildings and service facilities
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

UPS bypass switch/box. For UPS replacement without interruption.

The seamless switching of four states, including UPS testing/replacement and maintenance, is achieved with a single switch. It is suitable for preventing accidents such as momentary interruptions during maintenance.

■Features ▼ Achieves seamless switching among four states, including UPS testing/replacement and maintenance, with a single switch. ▼ Prevents accidents such as momentary interruptions during maintenance with overlapping contacts of the cam switch. ▼ Offers two types to match installation conditions: panel-mounted type and box type. ▼ The box type only requires connecting the wiring from the UPS to the terminal block, eliminating concerns about miswiring. ▼ Complies with IEC60947-3 standards. ▼ The switch features a terminal structure compatible with round crimp terminals. ▼ A wide range of options available, including additional auxiliary contacts, nameplate text, handles, and interlock mechanisms (keys, push buttons). ▼ Compatible with single-phase, three-phase, up to 350A, and up to 1000V.

Company：クラウスアンドナイマー
Price：Other

Audio equipment
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Patent Pending] Fireproof Switch Box

Prevents insulation failure, leakage current, and short circuit fires! Fire-resistant switch box with fireproof structure.

The "Fireproof Switch Box" is a product related to switch boxes used when installing switches and outlets on walls. In existing switch boxes, the "screw holes" are located inside the box, which can lead to screws coming into contact with internal wiring, causing shorts and potentially resulting in fires. In this product, the "screw holes" are located on the outside of the switch box, eliminating the risk of screws piercing the internal wiring and preventing issues such as insulation failure, leakage, and short circuit fires. Additionally, due to its sealed design, it maintains a fire-resistant structure. As we prepare for a nationwide rollout, we are conducting preliminary PR activities. If you need samples, we can send them, so please consider this. [Features] ■ "Screw holes" are on the outside of the switch box ■ Eliminates issues such as insulation failure, leakage, and short circuit fires ■ Fire-resistant structure due to sealed design *For more details, please refer to the PDF document or feel free to contact us.

Company：旭金属工業
Price：Other

others
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Easy to clean! Ideal for transporting liquids and powders - Iron frame + resin panel box.

Cleaning the interior is easy, making it ideal for transporting liquids and powders. The liquid discharge outlet also comes with an initial. Its folding structure allows for space-saving storage.

Chiba Sogyo and CS JAPAN's products strongly support the efficiency of logistics operations and cost reduction for logistics companies. Additionally, Chiba Sogyo Co., Ltd. also plans and manufactures original equipment tailored to customer requests. It is possible to place items in a box using a bulk bag and store them stacked as is. The folding structure allows for space-saving storage, and simple assembly improves work efficiency. The combination of a steel frame and resin panels prevents product damage. 【Features】 ○ Surface treatment: Hot-dip galvanized / painting, etc., available ○ Stacking capacity: 4 layers during storage, 2 layers during transport For more details, please contact us or download the catalog.

Company：シーエスジャパン株式会社（旧株式会社千葉総業) 本社
Price：Other

panel
Switch box

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Stainless Steel Band "SFT"

It can be used for various purposes such as the installation of cables, conduits, grounding ducts, utility pole tags, and signboards.

【Features】 ◆Safe Edge Folding Both edges of the strap are bent for the safety of the user. ◆Strong Clamping Force The clamping mechanism uses a ratchet system, providing a strong clamping force. ◆Excellent Workability The clamping fittings and strap are set together, allowing for easy tightening with repeated lever action, resulting in excellent workability.

Company：イワブチ
Price：Other

Support hardware/opening hardware
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Entrance Front Panel" April Best Product

Paying attention to appearance, carefully crafted to finish beautifully! Louvered panel.

We would like to introduce the best product of April manufactured by Excel Corporation. The best product of April is the "Entrance Front Panel." The front part is made of stainless steel square pipe 50x30x1.5HL (hairline) welded in an L-shape. The back part is a panel made from 1.5mm stainless steel sheet that has been black powder-coated. While many panels, such as eaves panels, are standalone, this one features square pipes installed in a louvered fashion across the entire front of the panel. We also have photos of other product examples on our website, so please take a look if you are interested. 【Features】 ■ Carefully crafted to ensure a beautiful finish with an emphasis on appearance ■ The front part is welded in an L-shape using stainless steel square pipe 50x30x1.5HL ■ The back part is a panel made from 1.5mm stainless steel sheet that has been black powder-coated ■ Installation is done by screwing from the back side, with caulking applied over the screws *For more details, please refer to the PDF document or feel free to contact us.

Company：エクセル
Price：Other

panel
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Magnet mounting plate with double-sided tape

This is a product with double-sided tape attached to a 2mm thick iron plate.

By applying it to areas where magnetization is needed, it is possible to attach magnets anywhere. It can be used outdoors and indoors, and it employs high-performance, high-quality 3M double-sided tape.

Company：ラクテム
Price：Other

Other office supplies
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coin battery holder CDH-100・CDH-200

It won't come off easily, so there's no need to worry about poor contact.

Battery holder for mounting coin batteries on a printed circuit board.

Company：廣杉計器
Price：Other

others
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coin battery holder "CDH-100・CDH-200"

This is a battery holder for mounting coin batteries on a printed circuit board.

The coin cell battery holders "CDH-100 and CDH-200" use 66 nylon (with 30% glass content) for the resin part, which is flame-retardant with a UL94-HB rating (material). The terminal part is made of stainless steel, and the terminals are treated with gold plating (with a nickel undercoat). Due to the nature of the resin in the main body, it may deteriorate at high temperatures, so we recommend conducting preliminary tests before actual use. Once the battery is installed, it is securely held in place and will not easily come loose, eliminating concerns about poor contact. There are two types available: a snore hole pin type and a surface mount type. The terminal part features a gold-plated finish on nickel-plated stainless steel, allowing for the flow of weak currents. When removing or attaching the battery, it can be easily taken out by gently pressing the central tab with a finger or pen tip. For more details, please download the catalog.

Company：廣杉計器
Price：Other

others
Switch box

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Coin battery holder "CDH-100/200/300"

Introducing a surface mount coin battery holder compatible with RoHS2, designed for through-hole pin mounting.

We would like to introduce the coin battery holder 'CDH-100/200/300' handled by Hiroshima Instruments. We offer both through-hole pin mounting and surface mount types. These products comply with RoHS2 standards. Please feel free to consult us when you need assistance. 【Specifications (partial)】 <CDH-100 Through-hole pin mounting> ■ Rated current: 120mA ■ Contact resistance: 100mΩ or less ■ Insulation resistance: 100MΩ or more ■ Dielectric strength: AC500V for 1 minute without abnormalities ■ Operating temperature range: -20℃ to +60℃ *For more details, please refer to the PDF document or feel free to contact us.

Company：廣杉計器
Price：Other

Parts and Materials
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

AdvancedTCA Front Panel

Custom manufacturing available! Front panel compliant with PICMG 3.0 AdvancedTCA standards.

The "AdvancedTCA Front Panel" is a front panel compliant with the PICMG 3.0 AdvancedTCA standard. It is designed to be integrated into an EMC gasket panel, eliminating insertion damage and the peeling of the gasket due to heat. The handle supports hot-swap functionality. The click feel of the micro switch ON/OFF is clear, preventing malfunctions. 【Features】 ■ Front panel compliant with PICMG 3.0 AdvancedTCA standard ■ Made from pre-coated aluminum material that is resistant to surface scratches and fingerprints ■ Designed to be integrated into an EMC gasket panel ■ Handle compatible with hot-swap functionality ■ Available for RTM as well ■ Custom manufacturing is possible *For more details, please refer to the PDF document or feel free to contact us.

Company：ユーバー
Price：Other

panel
Other fixtures and fittings
others
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

VME front panel

Essential functional components for the extraction and securing of VMEbus plug-in units. We respond to requests for small quantities and a variety of custom options.

Compliant with VME standards, we support custom solutions for small quantities and a variety of products. We can accommodate custom specifications such as hole processing, surface treatment, printed labels, and engraving, from a single piece to assembly! We offer a variety of accessory parts, including ejector handles essential for PCB insertion and removal, as our own products. We propose optimal specifications tailored to customer needs, including EMC compliance and RoHS compliance. 【Features】 ■ Support for custom specifications such as hole processing, surface treatment, printed labels, and engraving, from a single piece to assembly ■ All parts, including handles, are original products, allowing for short delivery times ■ Design support is also possible from PCB diagrams and component documentation *For more details, please download the catalog or feel free to contact us.

Company：ユーバー
Price：Other

panel
others
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DIN Rail Bracket: DH Holder (DIN Rail Mounting Bracket)

Mounting brackets that can be easily fixed for the installation of wiring ducts, terminal blocks, and lug boards!

The "DH Holder (DIN Rail Mounting Bracket)" is a product used for mounting wiring ducts, terminal blocks, and terminal plates on DIN rails manufactured by Shinohara Electric. It can be securely fixed at any position on the DIN rail simply by tightening two fixing screws. Equipment can be easily mounted using screws (4 locations, M4 threaded). Additionally, it can also serve as a fastening bracket for terminal blocks, relays, etc. 【Features】 ■ One-sided mounting type: S type ■ Both-sided mounting type: RL type ■ Equipment can be easily mounted with screws ■ Can also be used as a fastening bracket for terminal blocks, relays, etc. *For more details, please refer to the PDF document or feel free to contact us.

Company：篠原電機
Price：Other

Structural Materials
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DIN Rail Bracket DH Holder (Socket Mount Type)

Just tighten one fixing screw! Outlet installation auxiliary bracket.

The "DH Holder (Socket Mounting Type)" is an auxiliary mounting bracket for sockets that is used by attaching it to a DIN rail made by Shinohara Electric. 【Features】 1. It now supports the installation of Panasonic and Meiko Electric tumbler switches (only DH-5050TS). 2. It can be fixed at any position on the DIN rail by simply tightening one fixing screw. 3. It uses flat head screws for the mounting screws (with countersunk holes), making the mounting surface flat. 4. It has been pre-processed for easy socket installation. 5. In addition to socket mounting, we can also perform additional processing to allow for the installation of noise filters, etc., upon request. *For more details, please refer to the PDF document or feel free to contact us.

Company：篠原電機
Price：Other

Structural Materials
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DIN Rail Bracket DH Holder (Blank Type)

A new size that can accommodate noise filters with widths of 52 to 53 mm has emerged!

The "DH Holder (Blank Type)" is an auxiliary bracket that can be mounted on a DIN rail made by Shinohara Electric, allowing customers to perform custom tap hole processing to attach various devices. It is designed to accommodate tap holes and round holes according to the breakers, devices, and brackets used, and is manufactured with a thickness of 2.3mm to ensure that screw threads can be secured without the need for barrelling. It can be fixed at any position on the DIN rail by simply tightening one fixing screw, eliminating the need for direct attachment to the middle plate. Countersunk screws are used for the mounting screws (with countersunk holes), making the mounting surface flat. 【Features】 - Custom hole processing can be done to match the breakers, devices, and brackets used. - Manufactured with a thickness of 2.3mm to ensure screw threads can be secured. - No need for direct attachment to the middle plate. - Countersunk screws are used for the mounting screws. *For more details, please refer to the PDF document or feel free to contact us.

Company：篠原電機
Price：Other

Structural Materials
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

DIN rail mounting bracket DH holder (switch mounting type)

Just tighten one fixing screw! Switch-mounted type DH holder.

The "DH Holder (Switch Mount Type)" is a product used in combination with the switch mounting brackets "TK-30," "TK-30-6.5," and "TK-30-16.5" manufactured by Shinohara Electric to mount toggle switches and volume controls onto DIN rails made by Shinohara Electric. It can be fixed at any position on the DIN rail by simply tightening one fixing screw. Additionally, it uses flat head screws for the mounting screws (with countersunk holes), making the mounting surface flat. Furthermore, it has been tapped to allow for easy installation of the switch mounting brackets. 【Features】 ■ Compatible brackets: Shinohara Electric switch mounting brackets TK-30, TK-30-6.5, and TK-30-16.5 ■ Can be fixed at any position on the DIN rail ■ Tapped for easy installation ■ Uses flat head screws for mounting *For more details, please refer to the PDF materials or feel free to contact us.

Company：篠原電機
Price：Other

Structural Materials
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

RF Matrix Switch Box MM6000

A switch box that can combine multiple input and multiple output RF signals in a matrix.

● RF signal switching device with multiple input and output ports ● The application software allows for high-speed and matrix-like switching of signal paths, enabling input signals to be directed to any output port ● All output ports are equipped with electronic programmable attenuators, allowing for seamless attenuation of RF signals ● RF signals input from multiple (24 or 16) input ports can be selected and output from 8 output ports However, the input and output ports are bidirectional ● Combination of input and output ports and attenuator control can be remotely operated from a PC within the LAN ● Remote access functionality (CLI command) enables TCP/IP socket communication with external applications ● Application software is included as standard

Company：マイクロニクス
Price：Other

others
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Exposed switch box

Introducing an exposed switch box that can accommodate an embedded outlet!

We would like to introduce exposed switch boxes for one and two outlets that can accommodate recessed outlets. Both the one-outlet and two-outlet versions can be directly connected to VE pipe size 22. The one-outlet version comes with a sleeve that allows for installation of size 16. 【Features】 ■ Can accommodate recessed outlets ■ Available in one-outlet and two-outlet versions ■ Direct connection to VE pipe size 22 ■ One-outlet version includes a sleeve for size 16 installation *For more details, please refer to the PDF document or feel free to contact us.

Company：アメリカン電機
Price：Other

others
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Metal mall accessory for 2 switch boxes.

Switch box for metal mall. Knockouts on top, bottom, and sides!

Metal moldings are ideal for protecting wiring in public spaces where people gather, such as offices, schools, and hospitals. They allow for flexible wiring in any space. We have added a switch box for two units as an accessory for the metal moldings. The material is steel plate, and it features knockouts on the top, bottom, and sides. Four mounting screws (M4) for fixtures are included. For more details, please contact us or refer to the catalog.

Company：マサル工業
Price：Other

Wiring devices
Water and sewerage pipe fittings
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Steel conduit accessories: outlet / concrete / switch box

Selling various accessories for steel conduit! We offer a range of materials necessary for conduit installation, including switch boxes, connectors, couplings, and locknuts!

<Regarding the handling of accessories for steel conduit> - Outlet boxes - Concrete boxes - Ceiling boxes - Switch boxes - Various covers - Saddles - Lock nuts - Ring reducers and more are widely available. (Waterproof connectors and couplings for steel conduit/exposed boxes are also scheduled to be released in 2021!) For details on various sizes and finishes, please refer to the catalog.

Company：八州電工
Price：Other

Wiring devices
Piping and electrical wiring materials
lamp
Switch box

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Electrical conduit accessory "Screwless exposed switch box"

Our exposed round corner boxes are conveniently available for purchase with individual shipping!

We would like to introduce our company's electrical conduit accessories, the "Screwless Exposed Switch Box." The "Screwless Square Exposed Switch Box" is available in the following configurations: single unit without hub, single unit with one side outlet, single unit with two side outlets, and single unit with two side outlets on one side. The "Screwless Round Exposed Box" is available without hub, with one side outlet, with two side outlets, with two side outlets L, with three side outlets, and with four side outlets. 【Product Lineup (Partial)】 ■KR1910 ■KR2510 ■NKR1911 ■NKR2511 ■NKR3111 *For more details, please download the PDF or feel free to contact us.